Story 9:16 ad maker
Story 9:16 ad maker
A 9:16 vertical ad has the whole phone to itself — and the whole phone is the problem. The top fifth hides under the profile avatar and close button; the bottom fifth disappears behind the caption, the link sticker, and the CTA bar. Upload one product photo and get back a pack of 1080x1920 posters laid out for that reality: hook in the upper-middle, product anchoring the center, CTA parked above the bottom controls — not a square ad stretched until it bleeds into the chrome.
The free preview is one full-quality 9:16 poster rendered by the real engine — view-only at 2K, no watermark, no credit card. It is enough to see whether the hook clears the top safe zone and the CTA survives the bottom UI. The $29 pack unlocks all 10 concepts and every Meta size — 1:1, 4:5, and this 9:16 — at 4K, no-watermark PNG/JPG, with ZIP download. Only QA-passed ads are charged; under 12 passing auto-refunds the difference, and ads never expire.
Examples
Story 9:16 ad maker examples
Every poster below comes from the same single product photo, recut into a different reason to stop the swipe — and each one is composed for the 9:16 crop, where the top and bottom thirds belong to the platform, not to you. Watch where the copy sits: the live area is the middle, and a good vertical ad earns its click without ever putting a word where the avatar or the link sticker will land.
Campaign brief
Story 9:16 Ad Maker campaign brief
A useful story 9:16 creatives page should help the visitor decide whether a vertical 9x16 frame for full-screen mobile ads beyond one specific social placement fits the product story. Use these notes to test the frame, not just the dimension.
Best use
Reach for the 9:16 maker when the spend is going to Stories, Reels, or status placements and you need the product to own the full screen. Vertical is the placement where a resized square ad looks most obviously resized — the dead bands appear top and bottom — so it pays to generate layouts built for the crop instead of cropping a feed ad and hoping.
Asset to upload
One clean product photo with enough resolution and headroom to anchor a tall 1080x1920 frame. The engine fills the center with the product and reserves the top and bottom thirds; if your source is a tight square crop, it has less room to breathe vertically, so a shot with a little space around the product travels best into full-screen.
First test
Pick the two vertical angles that disagree about why someone stops: a product-led hook against an offer-led one. Keep the crop and the safe-zone discipline identical so the only variable is the message — that is the test that tells you whether your swipe-stopper is the product or the deal.
Format choice
This page is 9:16 — full-screen 1080x1920 for Stories, Reels, and status. It is the placement to lead with when your traffic is full-screen mobile. The $29 pack also delivers 1:1 square and 4:5 feed from the same photo, so you can run the vertical where it belongs and keep a feed control without a second upload.
Human review
Before exporting, mock the export against a real Story or Reel: drop it behind the profile avatar, the caption, and the CTA bar in your head and confirm nothing load-bearing is buried. If the headline reads under the close button or the CTA collides with the link sticker, regenerate with the copy pulled toward center — the safe zones are non-negotiable.
How it works
Build Story 9:16 Ad Maker creative around the frame.
1
Upload the product
One clean photo with room to breathe. This single shot anchors the center of every 9:16 concept, so a shot with some space around the product gives the layout more to work with at full screen.
2
Steer the vertical hook
Set the direction, offer, and a short first line up front. Text is baked into each poster and the live area is the middle band, so this is where you keep the hook tight enough to clear the top and bottom safe zones.
3
Review against the crop
Full-quality previews come back in a few minutes. Check each one the way the platform will show it — avatar up top, caption and CTA bar down bottom — and regenerate any angle whose copy drifts into the chrome.
4
Export the runners
Unlock the 9:16 winners at 4K, no-watermark, in the ZIP — alongside 1:1 and 4:5 from the same photo. Only QA-passed ads are charged; under 12 auto-refunds the difference, and ads never expire.
Ad angles included
Ad angles for Story 9:16 ad maker
A 9:16 vertical ad is the only placement that gets the entire screen, and that is exactly why it is the easiest to get wrong: the top and bottom thirds are owned by the platform — avatar and close button up top, caption, link sticker, and CTA bar down bottom — so the real canvas is the middle band. The angles worth testing all respect that live area differently: a product-led hook, an offer badge mid-frame, a single proof line above the product. A pack lets you compare them at full size before any spend, instead of stretching one feed ad and discovering the headline lives under the close button.
Field notes
Story 9:16 Ad Maker field notes
These field notes are a quick human quality pass for story 9:16 creatives and a vertical 9x16 frame for full-screen mobile ads beyond one specific social placement before you turn previews into production ads.
Creative review
- The 9:16 frame is 1080x1920, but you only really get the middle ~60% — roughly the band from 250px down to 1600px. Treat the top and bottom thirds as borrowed by the platform and design for the center.
- The single most common vertical mistake is a stretched square: a 1:1 ad scaled to fill 9:16 leaves the product floating in a tall void with copy stranded in the dead zones. Generate for the crop instead of resizing into it.
- Top safe zone first: Stories and Reels stack the profile avatar, handle, and close button across the upper fifth. Any headline up there gets covered — keep the hook in the upper-middle, not the very top.
- Bottom safe zone is busier than the top: caption, link sticker, music tag, and the CTA bar all live in the lower fifth. Park your baked-in CTA above that line or it competes with the platform's own button.
Placement review
- The product belongs at or just below center, where the eye lands first on a full-screen open. High enough to clear the bottom UI, low enough to sit under the top chrome.
- A short hook beats a clever one in vertical — you have one band of live area, and a two-line headline either shrinks the product or runs into the chrome. Name the swipe-stopper in the first line.
- Reels and Stories use slightly different bottom UI, but the safe-zone rule is the same: keep load-bearing copy out of the lowest and highest fifths and the same poster works across both.
Export review
- Empty top and bottom thirds are a feature, not wasted space — that breathing room is what makes a vertical ad look designed-for-the-placement instead of cropped-into-it.
- If your one vertical hero and your offer angle are the same product with swapped headlines, regenerate before exporting — a pack should give you genuinely different swipe-stoppers, not one ad in two fonts.
Sizes and exports
Sizes and exports for Story 9:16 ad maker
For story 9:16 creatives, the export shape should support the product story. Static posters are available first; display and HTML5 exports stay clearly labeled as agency or roadmap workflows until enabled.
9:16 vertical
Use 9:16 vertical for full-screen mobile placements where the product and CTA for story 9:16 creatives need strong top-to-bottom spacing.
1:1 square
Use 1:1 square when the story 9:16 creatives concept needs a balanced product, hook, and CTA layout.
4:5 feed
Use 4:5 feed when the product in story 9:16 creatives needs more vertical room than a square ad but still appears in feed.
9:16 story/reels
Use 9:16 story/reels for full-screen mobile placements where the product and CTA for story 9:16 creatives need strong top-to-bottom spacing.
Facebook feed
Use Facebook feed when the product in story 9:16 creatives needs more vertical room than a square ad but still appears in feed.
Story 9:16 Ad Maker pages should help a founder decide what to make next: which product image to use, which hook to test, which placement to export, and what should stay locked behind a paid pack. That is why Product AdKit centers the product workflow instead of offering a generic design surface.
Copy examples
Hooks, CTAs, and mistakes for Story 9:16 ad maker.
Headline hooks
- The swipe stops here. So does the search.
- One thumb. Full screen. Your product, finally.
- Built for the part of the screen nobody clips.
- Hook up top, product center, nothing buried.
- Made to survive the avatar and the link sticker.
- Full-screen. Not a square doing its best.
- The middle third is where the click lives.
- Stories, Reels, status — one upload, all vertical.
CTA examples
- Generate this size
- Preview the format
- Export the pack
- Check the layout
- Start from a product photo
Common mistakes
- Stretching a 1:1 or 4:5 ad to fill 9:16 — the product floats in a tall void and the copy lands in the platform's dead zones.
- Putting the headline in the very top fifth, where the profile avatar and close button cover it on Story and Reels.
- Parking the CTA at the absolute bottom, where the caption, link sticker, and platform CTA bar bury it.
- Writing a two- or three-line hook that crowds the product out of the only live band you get in vertical.
- Designing on a clean canvas and forgetting the chrome exists — then watching the export collide with real UI in the wild.
Editorial review
Story 9:16 Ad Maker review checklist
Use this story 9:16 creatives checklist as a human quality pass before turning previews into production ads.
1
Is the hook in the upper-middle, clear of the top ~250px where the avatar and close button sit?
2
Does the product anchor at or just below center, not floating in a stretched-square void?
3
Is the CTA above the bottom ~320px, clear of the caption, link sticker, and platform CTA bar?
4
Is the first line short enough to live in the middle band without crowding the product?
5
Did you preview it behind real Story and Reels UI before paying to export?
FAQ
Story 9:16 ad maker questions
What are the top and bottom safe zones for a 9:16 Story or Reels ad?
As a working rule, keep load-bearing copy out of roughly the top 250px and bottom 320px of the 1080x1920 frame. The upper band hides under the profile avatar and close button; the lower band sits behind the caption, link sticker, and CTA bar. The posters here are laid out to keep the hook in the upper-middle and the CTA above the bottom UI for exactly this reason.
What resolution should a vertical 9:16 ad be?
1080x1920 is the standard for Stories, Reels, and status — that is the 9:16 ratio at full mobile resolution. The free preview renders this size at 2K view-only; the $29 pack exports it at 4K so it stays crisp even when a platform re-compresses it. Same single photo, no manual resizing to fit the frame.
Will the headline survive the crop and the app controls?
That is what the layout is built to protect. Because the text is baked into the poster, the engine places the hook and CTA inside the live middle band instead of the chrome-covered edges. Still, preview it against a real Story before you spend — if a line drifts toward the top or bottom fifth, regenerate with the copy pulled toward center rather than trying to edit it on a canvas.
Do I need a separate ad for Stories versus Reels, or every Meta size?
For vertical, no — Stories and Reels share the 9:16 frame and the same safe-zone discipline, so one well-composed poster runs across both. Across placements, run the size your spend actually lands on: lead with 9:16 for full-screen mobile, and the $29 pack also gives you 1:1 square and 4:5 feed from the same photo if you want a feed control. You don't have to run all of them.
Related tools